Digitrax BD4 Buku Petunjuk

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Sensor Keamanan Digitrax BD4. Digitrax BD4 1 halaman. Occupancy detector

Complete Train Control

Run Your Trains, Not Your Track!

BD4

Occupancy Detector

For 4 Detection Sections

For use with DS64 or SE8

Series Stationary Decoders

Features

Occupancy Detection for 4 detection sections lets you know when rolling

stock is in a detection section on your layout

Outputs for LEDs to indicate local detection section occupancy and zone

power status on a panel mounted display

3 Amp capacity per detection section

Connect to LocoNet via your DS64 or SE8 series decoder to transmit occu-

pancy information to your LocoNet system (works with the older DS54 too)

Detects any powered locomotive

Detects un-powered rolling stock equipped with resistor wheel sets

Anti-Chatter Filter For Reliable Occupancy Detection

Parts List

1 BD4

1 Block Monitor

The BD4 requires a DS64 or SE8 Series Stationary Decoder (sold separately) for

LocoNet reporting.

NOTE: The BD4 operates up to a maximum resistance across the tracks of

10Kohms for positive occupancy detection. Do not connect any other devices or

loads across the detection section track for proper operation.

Digitrax Manuals and Instructions are updated periodically.

Please visit www.digitrax.com for the latest version of all manuals.

Digitrax, LocoNet, Super Empire Builder, Super Chief, Zephyr and others included in this man-

ual are trademarks of various manufacturers including Digitrax. Digitrax products are covered

by multiple U.S. & International Patents and Patent applications.

Digitrax, Inc. is not responsible for unintentional errors or omissions in this document.

www.digitrax.com

All Scales

Occupancy Detection

5 Amps Peak, 3 Amps Continuous

1 Instruction Manual

Made in U.S.A.

BD4

Occupancy Detector for 4 Detection Sections

2443 Transmitter Road

Panama City, FL 32404

www.digitrax.com

850-872-9890

850-872-9557