Digitron 2029T Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Termometer Digitron 2029T. Digitron 2029T 2 halaman.

MAX/MIN Recorder

Press

key to start. The instrument will display alternating

symbols and current reading. Press again to display

the maximum temperature reading and

symbol will be displayed. Press again to display the minimum

temperature &

symbol will be displayed. Press again to return to the actual temperature display.

NOTE: To reset MAX/MIN recorder function, switch instrument off.

NOTE: Some functions maybe inhibited while information is stored in MAX/MIN mode. This is to prevent inadvertent

parameter mixing whilst in any of the above modes.

Probe Connection

The Probe is connected into the socket at the top of the unit, please ensure correct polarity.

Warning: Do not bring the probe into contact with any item connected to a hazardous voltage. A voltage exceeding

30V RMS or 42.4V peak with respect to earth or ground would be considered hazardous.

Sensor open circuit or over-range/under-range indication

If the sensor is open circuit, the display will show O-C as long as condition exists.

NOTE: If MAX/MIN mode is selected, O-C will not be cleared even after the open circuit has been cleared. If over

range or under range occurs the instrument will display OUT.

WARRANTY

This instrument has been tested following completion, and is warranted against faulty workmanship and materials

for one year from the date of purchase.

During the warranty period any defective instrument will be repaired or replaced at the discretion of the

manufacturer.

This warranty does not cover damage or failure resulting from misuse, accident, modification, adjustment or any

alteration with the internal arrangement of the instrument shall absolve the manufacturer from any liability in

respect of the instrument.