Cisco RSP7000 Menginstal - Halaman 4

Jelajahi secara online atau unduh pdf Menginstal untuk Perangkat Keras Jaringan Cisco RSP7000. Cisco RSP7000 26 halaman. Upgrade kit in the cisco 7000 series routers
Juga untuk Cisco RSP7000: Panduan Instalasi dan Konfigurasi (48 halaman)

Halaman Cetak

Product Overview

What Is the RSP7000?

The RSP7000 is a new main system processor module for the Cisco 7000 series chassis. It combines

all of the switched routing and high-speed switching functions of the separate Route Processor (RP)

and Switch Processor (SP), which are used in the Cisco 7000 series routers, but with improved

performance on a single processor module. The RSP7000 contains the central processing unit (CPU)

and most of the memory components for the Cisco 7000 series chassis.

Caution

to install the RSP7000 in any other slot but the chassis' 7000 RSP slot. Do not install the RSP7000

in the router's Route Processor (RP) slot. You must install the RSP7000 in the appropriate chassis'

7000 RSP slot. (See Figure 1 on page 2, for the Cisco 7000, or Figure 2 on page 3 for the Cisco

7010.)

Note

"Software Prerequisites" on page 7.

Figure 3

Caution

ON to the chassis. The RSP7000 does not support online insertion and removal (OIR).

4 Installing the RSP7000 Upgrade Kit in the Cisco 7000 Series Routers

To prevent damage to the chassis slot and to the connector on the RSP7000, do not attempt

For the appropriate Cisco IOS version required for the RSP7000, refer to the section

RSP7000

Bus connector

Flash card

(PCMCIA) slot

To prevent system problems, the RSP7000 must not be removed or installed with power

DRAM

SIMMs

Bank 0

U12

U18

Bank 1

U25

Flash SIMM

Auxiliary port

holder

CPU

U24

ROM monitor

(boot ROM)

NVRAM

U17

Console port