Cisco SCE 1000 and Panduan Memulai Cepat - Halaman 42
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco SCE 1000 and. Cisco SCE 1000 and 49 halaman. Service control engine 1000 2xgbe
Halaman Cetak
7
Installing a Service Control Application
• Advanced Configuration of the SCE Platform, page 42
• Loading and Activating a Service Control Application, page 42
Advanced Configuration of the SCE Platform
After you have installed your SCE 1000 platform hardware, checked all external connections, turned on the system power,
allowed the system to boot up, and performed the initial system configuration, you are ready to install the Service Control
application. However, before you install the application, you might need to perform more complex configurations, which are
beyond the scope of this publication.
For further information on system and interface configuration, refer to the following documents:
•
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Cisco SCE 2000 and SCE 1000 CLI Command Reference
•
Loading and Activating a Service Control Application
The SCE 1000 platform provides the basic functions of Service Control analysis and enforcement. A Service Control solution
requires that a Service Control application be loaded into the platform, to take advantage of the unique SCE platform
capabilities.
Loading and activating an application includes the following stages:
• Downloading the application provided as an SLI file to the SCE 1000 disk.
• Activating the application.
• Configuring the application.
The detailed procedure of how to perform these operations is not specified and described in this manual. For further details,
refer to the following documentation:
Cisco Service Control Application for Broadband User Guide
•
Cisco Service Control Application for Broadband Reference Guide
•
42