Cisco SCE8000 10 GBE Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco SCE8000 10 GBE. Cisco SCE8000 10 GBE 25 halaman. 10 gbe power supply

Halaman Cetak

The grounding lug and M4 hex-head screws with locking washers are provided in kit 69-0815-01

Note

• One grounding wire—Must be sized according to local and national installation requirements. Depending on the power

supply and system, a 12 AWG conductor or larger size wire is required for U.S. installations.

• Crimping tool—Must be large enough to accommodate the girth of the grounding lug when crimping the grounding cable

into the lug.

• Wire-stripping tool

• Appropriate cables to connect the SCE8000 to the network and console terminal

Unpacking the Cisco SCE8000 Chassis

When you unpack the Cisco SCE8000, do not discard the shipping container. Flatten the shipping cartons and store

Tip

them with the pallet. You may need these containers if you move or ship the Cisco SCE8000 in the future.

Check the contents of the shipping container:

• Check the contents of the accessories kit against the list of accessories in the

SCE8000 Installation and Configuration Guide and the packing slip. Verify that you received all listed equipment, which

should include the following:

Hardware and software documentation, if ordered

–

Optional equipment that you ordered, such as network interface cables, transceivers, or special connectors

–

Check the modules in each slot. Ensure that the configuration matches the packing list and that all the specified interfaces are

included.

Rack-Mounting the SCE8000 Chassis

This chapter provides information for rack-mounting the SCE 8000 chassis.

Warning

Before you install, operate, or service the system, read the

Cisco SCE8000

the system.

Before you start the installation described in this chapter, see the

Note

Installation and Configuration Guide

Installation Guidelines

Table 1 lists rack dimensions. Carefully check the contents of the shipping container, the accessories kit, and optional

equipment.

Table 1

Rack Dimensions

Width

Depth

Minimum vertical clearance

Platform. This guide contains important safety information you should know before working with

to verify that all site planning activities are complete.

Cisco SCE8000 Component List

Regulatory Compliance and Safety Information for the

Site Planning Checklist

17.75 inches (45.09 cm)

• Minimum: 19.25 inches (48.9 cm)

• Maximum 32 inches (81.3 cm)

8.7 inches (22.09 cm) (5 RU)

in the Cisco

in the

Cisco SCE8000