Cisco TelePresence Server 7010 Panduan Instalasi - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perangkat Keras Jaringan Cisco TelePresence Server 7010. Cisco TelePresence Server 7010 14 halaman. 600w ac-input power supply and fan tray replacement
Juga untuk Cisco TelePresence Server 7010: Manual Petunjuk Penggantian (23 halaman), Panduan Petunjuk Instalasi (15 halaman), Memulai (16 halaman), Manual Petunjuk Penggantian (18 halaman)
Halaman Cetak
Replacing the power supply
Replacing the power supply
CAUTION:
Only replace the power supply under the guidance of Cisco customer support.
The power supply will be installed when you receive your TelePresence Server. To replace the power supply:
1. Remove the power cable from the unit to disconnect the power.
2. Push the power supply latch to the right and grip the handle firmly. Pull the power supply to remove it.
3. Insert the replacement power supply so that the latch is at the bottom left.
4. Push the power supply firmly into the unit until the latch engages.
5. Reconnect the power cable.
Figure 3: Replacing the power supply
Cisco TelePresence Server 7010 Installation Guide
Page 11 of 14