Cisco UCS B200 M3 Catatan Instalasi dan Layanan - Halaman 3
Jelajahi secara online atau unduh pdf Catatan Instalasi dan Layanan untuk Perangkat Keras Jaringan Cisco UCS B200 M3. Cisco UCS B200 M3 37 halaman. Blade server
Juga untuk Cisco UCS B200 M3: Panduan Instalasi (34 halaman), Catatan Instalasi dan Layanan (36 halaman), Manual (8 halaman), Panduan Peningkatan (21 halaman), Catatan Instalasi dan Layanan (28 halaman)
Halaman Cetak
Table 1: Blade Server LEDs
LED
Power
Link
Health
Beaconing
Activity
(Disk Drive)
Color
Description
Off
Power off.
Green
Main power state. Power is supplied to all server components in
normal operation.
Amber
Standby power state. Power is supplied only to the service processor
(BMC) of the server so that the server can still be managed.
Note
Off
None of the network links are up.
Green
At least one network link is up.
Off
Power off.
Green
Normal operation.
Amber
Minor error.
Blinking Amber
Critical error.
Off
Beaconing not enabled.
Blinking blue 1 Hz
Beaconing to locate a selected blade—If the LED is not blinking,
the blade is not selected. You can initiate beaconing in UCS Manager
or by using the Locator button.
Off
Inactive.
Green
Outstanding I/O to disk drive.
Flashing Amber
Rebuild in progress. Health LED will flash in unison.
4 Hz
Flashing Amber
Identify drive active.
4 hz
If you press and release the front-panel power button, the
server performs an orderly shutdown of the 12 V main
power and goes to standby power state. You cannot shut
down standby power from the front-panel power button.
See the Cisco UCS Manager Configuration Guide for your
release for information about completely powering off the
server from the software interface.
3