Epson 3490 - Perfection Photo Scanner Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemindai Epson 3490 - Perfection Photo Scanner. Epson 3490 - Perfection Photo Scanner 6 halaman. Scanning application force quits on mac os 10.4
Juga untuk Epson 3490 - Perfection Photo Scanner: Mulai di sini (4 halaman), Buletin Dukungan Produk (23 halaman), Memperbarui (1 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (24 halaman), Buletin Dukungan Produk (29 halaman), Buletin Dukungan Produk (8 halaman), Petunjuk Keselamatan Penting (4 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (14 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (11 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (21 halaman), Mulai di sini (2 halaman)

Epson Perfection 3490 Photo

Scanning Film and Slides

The Perfection 3490 Photo scanner cover has a built-in

transparency unit. To scan film or slides, you'll need to remove

the reflective document mat from the cover and place the film

in a holder on the scanner glass.

1. Lift the scanner cover all the way up and slide the reflective

document mat up and off of the scanner cover.

Note: Make sure the cover cable is connected to the back of the

scanner.

2. If you're scanning film, slide it into the film holder with the

shiny base side facing down. Your images and any wording

on the film strip should appear backward on the side that

faces up.

3. Place the film holder in the correct position for your film or

slides. For slides, place the holder on the scanner first, then

place the slides in the holder. Match the letter on the film

holder tab with the corresponding letter on the scanner.

4 - Epson Perfection 3490 Photo

Note: Make sure the thin, rectangular calibration windows on

both ends of the film holder are uncovered to ensure an accurate

scan.

Position A Negatives

Scans the first 4 frames of the film strip in the 1, 2, 3, and 4

spots on the holder.

Position B Negatives

Scans the last 2 frames of the film strip in the 5 and 6 spots on

the holder.

Position C Slides

Place the holder on the scanner glass, then put the slides in

the holder. Place the top of the image toward the left side of

the scanner.

4. Close the scanner cover.

6/05