Epson 4180 - Perfection Photo Mulai dari Sini Manual - Halaman 3

Jelajahi secara online atau unduh pdf Mulai dari Sini Manual untuk Pemindai Epson 4180 - Perfection Photo. Epson 4180 - Perfection Photo 9 halaman. Scanning application force quits on mac os 10.4
Juga untuk Epson 4180 - Perfection Photo: Manual (8 halaman), Buletin Dukungan Produk (1 halaman), Petunjuk Keselamatan Penting (4 halaman), Spesifikasi (2 halaman), Buletin Dukungan Produk (23 halaman), Manual (11 halaman), Memperbarui (1 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (24 halaman), Buletin Dukungan Produk (29 halaman), Buletin Dukungan Produk (8 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (14 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (11 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (21 halaman)

Connect the cable for the built-in film adapter.

Connect the power cord and AC adapter, as shown.

Power cord

Connect the AC adapter to the scanner. Then plug the power cord into an

electrical outlet.

Use the USB cable that came with your scanner. Plug the square end of the

USB cable into the scanner's USB port. Then plug the flat end into any

available USB port on your computer or hub.

Note: Your scanner may not work correctly if you use a USB cable other than

the one supplied by Epson or if you connect it through more than one hub.

Turn on the power switch on the side of the scanner.

The scanner turns on and the ] Start button flashes green. It stops flashing

and stays green when the scanner is ready.

For Macintosh, restart your system to fully activate the scanner and

software.

AC adapter