Cisco APIC M4 Panduan Instalasi dan Servis - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Servis untuk Server Cisco APIC M4. Cisco APIC M4 46 halaman.

External Features

Figure 2: Cisco APIC M4 and L4 Server Rear Panel

PCIe slots

Following PCIe Riser combinations are available:

• One half-height riser card in PCIe Riser 1

• Three half-height riser cards in PCIe Riser 1, 2, 3

• Two full-height riser cards Riser 1 and 3

• Riser 1—Supports Riser1. Supports single x16 PCIe supporting full height 3/4 length cards in 2 riser configuration

(or) Half-height 3/4-length cards in 3 riser configuration and NC-SI from Pilot4.

• Riser 2—Supports Riser 1. Supports single x16 PCIe supporting only Half-height 3/4-length cards in 3-riser

configuration.

• Riser 3—Supports Riser 3A, 3B. PCIe slot 3 with the following options:

• Riser3A Supports single x16 PCIe supporting half height 3/4 length cards in 3 riser configuration and NC-SI.

• Riser3B Supports single x16 PCIe supporting full height 3/4-length cards in 2 riser configuration and NC-SI.

Power supply units (PSUs), two which can be

redundant when configured in 1+1 power mode.

System identification button/LED

Dedicated 1 GB Ethernet management port

VGA video port (DB-15 connector)

Note

• All ports must have the same speed, either 10-Gigabit or 25-Gigabit.

• Port-1 and port-2 is one pair, corresponding to eth2-1 on APIC and port-3 and port-4 is another pair,

Cisco APIC M4/L4 Server Installation and Service Guide

The VIC 1455 has 4 ports, port-1, port-2, port-3, and port-4 from left to right.

corresponding to eth2-2 on APIC. Only one connection is allowed for each pair. For example, you can

connect one cable to either port-1 or port-2, and connect another cable to either port-3 or port-4 (please

do not connect two cables on any pair).

Modular LAN-on-motherboard (mLOM) card bay

(x16 PCIe lane)

USB 3.0 ports (two)

COM port (RJ-45 connector)

Overview