Epson ActionLaser 1500 Buletin Dukungan Produk - Halaman 6
Jelajahi secara online atau unduh pdf Buletin Dukungan Produk untuk Pemindai Epson ActionLaser 1500. Epson ActionLaser 1500 8 halaman. Imaging cartridge replacement procedure
Juga untuk Epson ActionLaser 1500: Pengiriman Kertas dan Kertas (11 halaman), Setup Manual (18 halaman), Panduan Instalasi (7 halaman), Spesifikasi Produk (1 halaman)
![Epson ActionLaser 1500 Buletin Dukungan Produk](/uploads/products/server2/586697/586697.png)
13.
Q. Can the ActionLaser 1000 and ActionLaser 1500 feed different paper
sizes?
A. Yes. The new ActionLaser printers have an internal adjustable paper tray.
The tray accepts up to 150 sheets of 20 lb. paper in various sizes,
including letter and legal size. The internal paper tray may also be
adjusted to accept up to 10 envelopes. An additional 250 sheet letter size
paper tray is also available. This optional tray is placed under the printer,
keeping the same size footprint.
14.
Q. Is there Macintosh compatibility with the ActionLaser 1000 and
ActionLaser 1500?
A. Yes. The Epson AppleTalk interface and PostScript options allow the new
ActionLasers to be connected directly to a LocalTalk* network, or directly
to an Apple Macintosh computer.
15. Q. What is MicroArt printing?
A. MicroArt printing uses toner with a smaller particle size than that used in
conventional toner. The benefits of MicroArt printing are blacker blacks,
fine line reproduction, no "edge effect" (a printer error that causes edges
to be darker than the center portion of an image), and less toner blurring.
16. Q. What is R/Tech?
A. Resolution Improvement Technology (RITech) allows the ActionLaser
1500 to reassemble the dot mapped data to improve the printed image.
This improvement smoothes text and graphics to eliminate the "jaggies" or
jagged edges from text and graphics.
17. Q. How do I set the ActionLaser 1000 and ActionLaser 1500 back to the
factory default settings?
A. 1. Turn off the printer
2. Press and hold the Initialize/Reset button while turning on the printer
until "FACTORY RESET" appears on the LCD display, then release
the button.
PSB No: P-0095A
Page: 4 of 6