Cisco C220 M3 Pengaturan - Halaman 5

Jelajahi secara online atau unduh pdf Pengaturan untuk Server Cisco C220 M3. Cisco C220 M3 10 halaman. Rack server

Server Setup

Figure 5: Network Interfaces Setup Diagram

Note

In Threat Grid Appliance (v2.7.2 and later), there is also the enable_clean_interface option, which is disabled

by default. This option (after applying configuration and rebooting) enables access to the administrative

interface on port 8443 of the assigned clean IP.

Firewall Rules

This section provides suggested firewall rules.

Note

Implementing a restrictive outgoing policy on the Dirty interface for ports 22 and 19791 requires tracking

updates over time and spending more time maintaining the firewall. See the required destinations in the

configuration sections.

Note

Using IPv4LL address space (168.254.0.16) for the Dirty interface is NOT supported.

Firewall Rules

Server Setup