Epson CX4800 - Stylus Color Inkjet Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemindai Epson CX4800 - Stylus Color Inkjet. Epson CX4800 - Stylus Color Inkjet 18 halaman. Epson scan icm updater v1.20 (psb.2008.07.001)
Juga untuk Epson CX4800 - Stylus Color Inkjet: Panduan Cepat (48 halaman), Mulai dari Sini Manual (8 halaman), Ringkasan Teknis (6 halaman), Memperbarui (1 halaman)

Epson CX4800 - Stylus Color Inkjet Panduan Pengguna
Caution:
Do not move the print head by hand; this may damage the Epson
Stylus CX. Always press the
4. Press the B ink button again.
❏ If more than one cartridge is empty or low, the next
cartridge moves to the _ ink out mark.
❏ Once the Epson Stylus CX has identified all of the
empty or low ink cartridges, the print head moves to the
ink cartridge replacement position.
5. Open the cartridge cover.
6. Squeeze the tab at the back of the cartridge and lift it
straight out. Dispose of it carefully. Do not take the used
cartridge apart or try to refill it.
Warning:
If ink gets on your hands, wash them thoroughly with soap and
water. If ink gets into your eyes, flush them immediately with
water.
Epson Stylus CX4200 Series/Epson Stylus CX4800 Series
B
ink button to move it.
7. Before you open the new ink cartridge package, shake it
four or five times. Then remove it from the package.
Caution:
Do not touch the green chip on the front of the cartridge. This can
damage the ink cartridge.
8. Place the new ink cartridge into the cartridge holder and
push it down until it clicks into place.
9. Replace any other cartridges that need to be replaced.
10. Close the ink cartridge cover and press it until it clicks into
place.
5/05
15