Finale Audio F-108 Panduan Pengguna Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna Cepat untuk Penguat Finale Audio F-108. Finale Audio F-108 5 halaman.

QUICK CONNECTIONS:

1. Plug in all tubes at correct locations (EL84 / 6BQ5 / 7189 X 2 Pcs on the outer tube

sockets and 1 Pcs 12AX7 / ECC83 in the middle of the three tube sockets in the

front – see above picture). 1 Pc of 6CA4/EZ81 Rectifier tube in the back location

between the transformers.

2. Connect your source to RCA Jacks (Red/White RCA cables for signal inputs) on

the left side of the amplifier, and connect speaker wires (Red/Black Binding

Posts) in the back of the amplifier

3. Plug in power cord (Do this at last, in case the power switch is on)

4. Turn ON the power button in the back

5. Select your source input via Selector knob (The knob on the left)

6. Turn to suitable volume Via Volume Knob (The knob on the right - And is a good

practice to dial volume to lowest before start and after finish)

7. Sit back, relax and enjoy!

http://www.FinaleAudio.com | USER MANUAL F-108