Cisco Firepower Management Center 3500 Panduan Memulai - Halaman 22
Jelajahi secara online atau unduh pdf Panduan Memulai untuk Server Cisco Firepower Management Center 3500. Cisco Firepower Management Center 3500 42 halaman. Firepower management center
Halaman Cetak
The password may have up to 20 alphanumeric characters. Longer passwords are not supported for LOM
users. A user's LOM password is the same as that user's system password.
Management Centers can have up to 13 LOM users.
Note:
For detailed instructions on the following tasks, see the Configuring Appliance Settings chapter in the
Firepower Management Center Configuration Guide.
To enable LOM:
1.
Select
System > Configuration
2.
For
Console
, choose
3.
Specify the LOM IP address, netmask, and default gateway (or use DHCP to have these values automatically
assigned).
Note:
The LOM IP address must be different from the management interface IP address of the appliance.
To enable LOM capabilities for a Firepower System user:
1.
Select
System > User Management
that you will use for LOM access to the appliance.
2.
On the User Configuration page, enable the
3.
Enable the
Allow Lights-Out Management Access
Installing an IPMI Utility
You use a third-party IPMI utility on your computer to create an SOL connection to the appliance.
If your computer is running Linux or Mac OS, use IPMItool. Although IPMItool is standard with many Linux
distributions, you must install IPMItool on a Mac. First, confirm that your Mac has Apple's xCode developer tools
package installed. Also, make sure the optional components for command line development are installed ("UNIX
Development" and "System Tools" in newer versions, or "Command Line Support" in older versions). Finally,
install MacPorts and IPMItool. For more information, use your favorite search engine or see these sites:
https://developer.apple.com/technologies/tools/
http://www.macports.org/
For Windows environments, use ipmiutil, which you must compile yourself. If you do not have access to a compiler,
you can use ipmiutil itself to compile. For more information, use your favorite search engine or see this site:
http://ipmiutil.sourceforge.net/
Restoring a Firepower Management Center to Factory
Defaults
Cisco provides ISO images on its Support Site for restoring, or reimaging, Firepower Management Centers to their
original factory settings.
For more information, see the following sections:
Before You Begin, page 23
Understanding the Restore Process, page 24
Obtaining the Restore ISO and Update Files, page 25
Beginning the Restore Process, page 25
Cisco Firepower Management Center Getting Started Guide
, then click
Console Configuration
Physical Serial Port.
, then either edit an existing user to add LOM permissions, or create a new user
Restoring a Firepower Management Center to Factory Defaults
.
Administrator
role if it is not already enabled.
check box and save your changes.
22