Epson CX6400 - Stylus Color Inkjet Buletin Dukungan Produk - Halaman 3

Jelajahi secara online atau unduh pdf Buletin Dukungan Produk untuk Pemindai Epson CX6400 - Stylus Color Inkjet. Epson CX6400 - Stylus Color Inkjet 6 halaman. Product support bulletin(s)
Juga untuk Epson CX6400 - Stylus Color Inkjet: Spesifikasi (2 halaman), Manual Informasi (4 halaman), Lembar Informasi Produk (4 halaman), Informasi Produk (14 halaman), Mulai dari Sini Manual (8 halaman), Mulai dari Sini Manual (9 halaman), Setup Manual (2 halaman), Memperbarui (1 halaman), Buletin Dukungan Produk (1 halaman)

Updating the firmware:

1.) Configure the Mac and the print server for TCP/IP.

2.) Download/copy the "WLEP399.bin" firmware file from the epson10651.sea.hqx to

the Apple Desktop.

3.) Navigate to Macintosh HD>Applications>Utilities>Terminal

4.) At the terminal screen do the following:

1. Type cd desktop then press the RETURN key

2. Type tftp <ipaddress* of the print server> then press the RETURN key

3. At the tftp> prompt, type binary then press the RETURN key

4. At the tftp> prompt, type put <WLEP399.bin**> then press the RETURN key

*Where ipaddress is the IP address of the Wireless print server.

135.79.2.468 or 10.0.1.3

**Where WLEP399.bin is the filename of the 3.99 firmware update.

5. You will get a message on the screen, at the TFTP> prompt, that a number of bytes

were sent. This means the update is complete.

5.) Next, go to the print server and perform a reset, then launch WP-Admin again to setup the

print server. At WP-Admin in the search screen, click on CLEAR, then click on START for

the print server to reappear. Finish the print server configuration, then Quit WP-ADMIN.

Search for the printer:

Once the update is complete, open the Print Center.

Select ADD Printer and choose Epson AppleTalk. This will allow you to select the Stylus

Photo 2200 printer.

Page 2 of 2

Examples