Cisco Nexus 7000 Series Panduan Petunjuk Instalasi - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Server Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 39 halaman. Switch chassis
Juga untuk Cisco Nexus 7000 Series: Panduan Referensi (2 halaman), Referensi (34 halaman), Panduan Instalasi (18 halaman), Mengkonfigurasi (8 halaman), Panduan Konfigurasi (28 halaman), Panduan Memulai Cepat (10 halaman), Panduan Memulai Cepat (29 halaman), Manual Petunjuk Penggantian (14 halaman), Manual Petunjuk Penggantian (21 halaman), Panduan Instalasi (16 halaman), Panduan Pemecahan Masalah (10 halaman)

Halaman Cetak
Cisco Nexus 7000 Series Panduan Petunjuk Instalasi
Installation

Attaching the Chassis Ears

The ears attach directly to the chassis with four M4 x 10-mm, flat-head screws. Attach the ears to
the chassis before you slide the chassis onto the brackets and back into the rack. After you slide the
chassis into the rack, insert a 10-32 x 5/8-inch pan-head screw through each of the captive grommets
on the ears and through the rack-mounting strips. The ears do not bear the weight of the chassis, but
prevent it from walking, or sliding horizontally out of the rack.
You can mount the ears on either the front or rear of the chassis, whichever end will be in the front
of the rack. We recommend that you attach them to the interface processor end of the chassis, so the
power supplies and processor modules will be accessible at the front of the rack.
In most four-post racks, you will attach the ears with the mounting strip flush with the end of the
chassis. Figure 4, on page 6, shows a typical flush-mount installation. In Figure 12, the example
insert on the right shows how the ears attach to the chassis for flush mounting.
In some Telco-type racks, it is more practical to center-mount the chassis. To do so, flip the ears
around so that the mounting strips are near the center of the side of the chassis. Figure 3, on page 5,
shows a typical center-mount installation. In Figure 12, the example insert on the left shows how the
ears attach to the chassis for center mounting.
Figure 12
Center-mount
position
20 Cisco 7000 and Cisco 7507 Rack-Mount Kit Installation Instructions
Installing the Ears on the Chassis
OR
Flush-mount
position