B2 Anno Panduan Pemilik - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat B2 Anno. B2 Anno 10 halaman. High performance amplifiers

REMOTE LEVEL CONTROL PORT

Connection of external level control.

Ref 0.5 & Anno

3-3.

GND ( GROUND CONNECTION )

For connection to the chassis' ground.

For optimum performance 0 gauge cable is

recommended.

+12V ( POWER CONNECTION )

For connection to the positive terminal of the

battery (+12). For optimum performance

0 gauge cable is recommended.

If you chose to install the

Before you start your installation, please take all steps into consideration. Otherwise, please go to

www.b2-audio.com for authorized distributors or contact us directly for support.

Disconnect the negative ( ) battery cable before mounting

Check the battery and alternator ground ( ) connections.

Make sure they are properly connected and free of corrosion. Before selecting a mounting location

for the amplifier, please take cooling and safety into consideration.

4-2. MOUNTING PREPARATION

amplifiers have been designed with a good heat radiation heatsink to avoid excessive heat

from the amplifier circuitry. For optimum heat radiation performance, it is recommended to

find a mounting location that allows for vertical installation of the heat sink fins.

CONTROL & CONNECTION

series by yourself, please read the owners' manual carefully.

POWER & PROTECTION INDICATOR

Power BLUE, Green-lit shows correct operation

Protect LED, RED-lit shows general malfunction,

faulty connection or thermal protection

REM ( REMOTE )

Connect to switched +12V with trigger from head unit.

SPEAKER OUTPUTS

Amplifier connection to loudspeakers.

Minimum speaker cable is 12 gauge.

Ref 0.5

minimum impedance is 1 ohm if used as

a single unit.

Ref 0.5

in linked mode offers stable opearation to

a minimum of 2 ohms.

Anno

minimum impedance is 1ohms stereo or

4/2 ohms mono

series or making any connections.