Cisco ONS 15454 Memasang - Halaman 7

Jelajahi secara online atau unduh pdf Memasang untuk Server Cisco ONS 15454. Cisco ONS 15454 32 halaman. Four-shelf and zero-shelf bay assembly
Juga untuk Cisco ONS 15454: Panduan Petunjuk Instalasi (22 halaman), Memasang (32 halaman), Membongkar dan Memasang (42 halaman), Membongkar dan Memasang (40 halaman)

Chapter 1 Install the Shelf and Backplane Cable

NTP-A4 Remove the Backplane Covers

Purpose

Tools/Equipment

Prerequisite Procedures

Required/As Needed

Onsite/Remote

Security Level

Warning

The covers are an integral part of the safety design of the product. Do not operate the unit without the

covers installed.

Complete the

Step 1

Step 2

Complete the

Step 3

If you plan to install electrical interface assemblies (EIAs), continue with the

page

Stop. You have completed this procedure.

78-18537-01

This procedure describes how to access the backplane by removing the

covers. The backplane has two sheet metal covers (one on either side)

and a lower backplane cover at the bottom.

#2 Phillips screwdriver

Medium slot-head screwdriver

Small slot-head screwdriver

NTP-A2 Install the Shelf Assembly, page 1-5

NTP-A3 Open and Remove the Front Door, page 1-6

Required

Onsite

None

"DLP-A10 Remove the Lower Backplane Cover" task on page

"DLP-A11 Remove the Backplane Sheet Metal Cover" task on page

1-8. If not, continue with the

1-9.

NTP- A4 Remove the Backplane Covers

"NTP-A6 Install the Power and Ground" procedure on

Cisco ONS 15454 Procedure Guide, Release 8.5.1

17-10.

17-11.

"NTP-A5 Install the EIAs"

1-7