Cisco ONS 15454 Memasang - Halaman 14

Jelajahi secara online atau unduh pdf Memasang untuk Server Cisco ONS 15454. Cisco ONS 15454 32 halaman. Four-shelf and zero-shelf bay assembly
Juga untuk Cisco ONS 15454: Panduan Petunjuk Instalasi (22 halaman), Memasang (32 halaman), Membongkar dan Memasang (42 halaman), Membongkar dan Memasang (40 halaman)

NTP-A119 Install the Alarm Expansion Panel

Figure 1-3

Step 4

Insert and tighten three screws to secure the AEP to the backplane.

Connect the AEP cable to the backplane and AEP:

Step 5

Connect the 10 colored wires to the wire-wrap pins on the backplane.

cable wires are connected.

Plug the other end of the AEP cable into AEP connector port. The brown pin is on the top.

Cisco ONS 15454 Procedure Guide, R5.0

1-14

Installing Standoffs and the AEP

Wires

AEP cable

Connector

Table 1-1

Chapter 1

shows AEP and AIC-I signals that each wire carries.

Install the Shelf and Backplane Cable

Figure 1-4

shows where the

March 2005