Cisco Profile Series Panduan Memulai Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Server Cisco Profile Series. Cisco Profile Series 4 halaman. Jbod on the 12g sas modular raid controller
Juga untuk Cisco Profile Series: Panduan Memulai (41 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (7 halaman), Panduan Memulai (35 halaman), Panduan Referensi Cepat (2 halaman), Panduan Instalasi (44 halaman), Panduan Konfigurasi (13 halaman), Lembar Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Memulai Cepat (4 halaman), Panduan Instalasi (16 halaman), Panduan Memulai (32 halaman), Manual (16 halaman), Panduan Memulai (42 halaman), Panduan Memulai (46 halaman)

steps below were performed on Windows 7.

Download the live .iso image here:

Download Universal USB Installer here:

easy-as-1-2-3/

Launch UUI, and select CentOS as the desired Linux Distribution

Point UUI to the .iso downloaded in step 1.

Select desired USB drive to install to, and then click "Create". Wait for the process to

complete, then USB is ready to use.

6. Plug in USB to affected server and select it as the desired boot device.

Note: The USB loaded with the above image will boot to CentOS, and then launch a series of

UCScfg commands. This particular .iso corrects the optionROM settings AND sets the MLOM Port

0 as the first boot device. After the configuration changes complete, the server will power off.

Changes will be reflected at next power on. UCScfg can be used to customize BIOS/IMC settings

as desired, and the process shown above is just an example, and will correct the issues

mentioned in this article only.

Live CD

http://www.pendrivelinux.com/universal-usb-installer-