Cisco SNS-3495 series Panduan Instalasi - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Server Cisco SNS-3495 series. Cisco SNS-3495 series 36 halaman. Sns-3400 series
Juga untuk Cisco SNS-3495 series: Panduan Instalasi (19 halaman), Panduan Pemecahan Masalah (8 halaman)

Halaman Cetak
Cisco SNS-3495 series Panduan Instalasi

Installation Guidelines

•
Installation Guidelines
Warning
Warning: To prevent the system from overheating, do not operate it in an area that exceeds the maximum
recommended ambient temperature of: 40° C (104° F).
Statement 1047
Warning: The plug-socket combination must be accessible at all times, because it serves as the main
Warning
disconnecting device.
Statement 1019
Warning
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than: 250 V, 15 A.
Statement 1005
Warning
Installation of the equipment must comply with local and national electrical codes.
Statement 1074
Caution
Avoid UPS types that use ferroresonant technology. These UPS types can become unstable with systems
such as the Cisco UCS, which can have substantial current draw fluctuations from fluctuating data traffic
patterns.
When you are installing a server, use the following guidelines
• Plan your site configuration and prepare the site before installing the server. See the
• Ensure that there is adequate space around the server to allow for servicing the server and for adequate
• Ensure that the air-conditioning meets the thermal requirements listed in the
• Ensure that the cabinet or rack meets the requirements listed in the
• Ensure that the site power meets the power requirements listed in the
Cisco SNS-3400 Series Appliance Hardware Installation Guide
14
Slide Rail Adjustment Range, on page 15
Preparation Guide
for the recommended site planning tasks.
airflow. The airflow in this server is from front to back.
page
15.
16. If available, you can use an uninterruptible power supply (UPS) to protect against power failures.
Before You Begin
Cisco UCS Site
Server Specifications, on
Rack Requirements, on page
Power Specifications, on page
15.