Cisco UCS Panduan Pengguna - Halaman 37

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Server Cisco UCS. Cisco UCS 50 halaman. C-series

Halaman Cetak
Cisco UCS Panduan Pengguna
Chapter 6
Installing Operating Systems
•
Step 4
Click Install.
A progress bar is displayed that indicates the tasks being performed and the percentage of completion.
An OS Install dialog box appears.
Step 5
Click Ok.
Step 6
Remove the UCS-SCU media and insert the required operating system CD.
Basic Configuration
To configure the basic configuration settings, follow these steps:
Step 1
Click Basic Configuration to open the corresponding window.
Step 2
In the Basic Configuration window, do the following:
a.
b.
c.
d.
e.
f.
Package Selection
To configure the package selection settings, follow these steps:
Step 1
Click Package Selection to open the corresponding window.
Step 2
Select all check boxes that apply.
Network Settings
To configure the network settings, follow these steps:
Step 1
Click Network Settings to open the corresponding window.
The Network Settings window displays the link status of available network interfaces and the
corresponding IP address, subnet mask, gateway, DNS, link status, vendor, type and MAC address.
Step 2
To edit the Network Settings, do the following:
a.
b.
Installation Drivers—To set the driver settings, go to
In the Root Password field, enter the root password.
In the Confirm Root Password field, reenter the root password.
From the Default Language drop-down list, choose a default language.
From the Keyboard drop-down list, choose the type of keyboard layout.
From the Time Zone drop-down list, choose the time zone.
In the Additional Languages list, select all languages that apply.
Select a network interface and click Edit.
The Network Settings dialog box is displayed.
In the Network Settings dialog box, do the following:
Installation Drivers, page
Cisco UCS Server Configuration Utility, Release 5.0
Other OS Install
6-10.
6-13