Cisco UCS 5100 Pengaturan - Halaman 8

Jelajahi secara online atau unduh pdf Pengaturan untuk Server Cisco UCS 5100. Cisco UCS 5100 17 halaman. Uplink ethernet connection
Juga untuk Cisco UCS 5100: Pengaturan (4 halaman), Manual Firmware (10 halaman), Konfigurasi (5 halaman), Manual (14 halaman), Petunjuk Peningkatan (10 halaman), Panduan Memulai Cepat (8 halaman), Panduan Konfigurasi (6 halaman)

4.1 Assign VSAN to FC Uplink Port in Fabric Interconnect

Now assign the VSAN you just created to the FC Uplink port in your Fabric Interconnect that has a direct link

to your SAN network. Complete these steps:

In the Navigation pane, choose the Equipment tab.

Choose Fabric Interconnect A > Expansion Module #.

Choose Uplink FC Ports and choose the FC Port 1 that has a connection to the upstream SAN

switch.

In the Work pane to the right in VSAN, choose the VSAN you just created from the drop−down

menu.

Click Save Changes.

Repeat the same process to assign this VSAN to all the designated FC Up link ports that remain on

this same Fabric Interconnect.