Digitus DS-30040-2 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kartu PCI Digitus DS-30040-2. Digitus DS-30040-2 7 halaman. Serial/parallel i/o pci express add-on card
Juga untuk Digitus DS-30040-2: Panduan Pengguna (6 halaman), Panduan Pengguna (5 halaman)

Halaman Cetak
Digitus DS-30040-2 Panduan Pengguna

Hardware Installation

1.
Turn Off the power to your computer.
2.
Unplug the power cord and remove your computer's cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
To install the card, carefully align the card's bus connector
with the selected PCIe slot on the motherboard. Push the
board down firmly.
5.
Replace the slot bracket's holding screw to secure the card.
6.
Replace the computer cover and reconnect the power cord.

Driver Installation

For Windows
1.
Don't insert the PCIe card into PCIe slot.
2.
At the Windows desktop click Start, then Run.
3.
Locate:\MCS9901\XP32bit\Setup.exe, then click OK.
4.
Press "Install" button to install the drivers.
5.
Click "Exit" button to complete the driver installation.
6.
Shutdown the PC.
7.
Place the PCIe card into PCIe slot and then power on the
system.
8.
Once the system gets booted the Windows will automatically
start installing the device driver software.
®
2000/XP/Server 2003