Cisco UCS B Series Panduan Peningkatan - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Peningkatan untuk Server Cisco UCS B Series. Cisco UCS B Series 21 halaman. Blade servers
Juga untuk Cisco UCS B Series: Panduan Memulai Cepat (10 halaman)

Halaman Cetak

Cisco UCS Blade Server

Note

# scope server <chassis/server>

# scope boardcontroller

# show image

# activate firmware <boardcontroller version>.0 force

# commit-buffer

See also

Step 7

Do not continue with the next step until the board controller activation completes. Verify whether the

activation is complete by using the show version command.

As shown in the example below, wait until the Activate-Status returns Ready. This process takes a few

minutes before Activate-status is successfully completed and returns Ready.

# show version

BoardController:

Running-Vers: 8.0

Package-Vers:

Activate-Status: Ready

Step 8

Clear the WILL_BOOT_FAULT

In the Navigation pane, click the Equipment tab.

On the Equipment tab, expand Equipment > Chassis > Chassis number > Servers, then choose

your server.

In the Work pane, click the General tab.

In the Actions area, click Recover Server.

In the Recover Server dialog, click Reset CIMC (Server Controller), then click OK.

Wait for CIMC to reboot and for Cisco UCS Manager to do a shallow discovery of the server. This

takes two to three minutes. At the end of this process the WILL_BOOT_FAULT is cleared.

Cisco UCS B-Series Servers Upgrade Guide for Intel E5-2600/E5 2400 v2 Series CPUs

The server automatically reboots after the

The

command in the sequence below lists the board controller versions available for

show image

the server. Always activate the latest board controller image version when you use the

command.

activate firmware

Sample Board Controller Activation Command Sequence, page

commit-buffer

using the Cisco UCS Manager GUI to reset the server CIMC:

command is executed.

15.

OL-28629-02