Cisco UCS B200 M3 Manual - Halaman 5
Jelajahi secara online atau unduh pdf Manual untuk Server Cisco UCS B200 M3. Cisco UCS B200 M3 8 halaman. Blade server
Juga untuk Cisco UCS B200 M3: Panduan Instalasi (34 halaman), Catatan Instalasi dan Layanan (36 halaman), Catatan Instalasi dan Layanan (37 halaman), Panduan Peningkatan (21 halaman), Catatan Instalasi dan Layanan (28 halaman)
Halaman Cetak
Boot-Time Configuration
Example commands for setting fnic_max_qdepth to 128:
RHEL 6 .x / SLES11 / XS
1 . In /etc/grub .conf, append fnic .fnic_max_qdepth=<value> to the kernel line:
kernel /vmlinuz-2 .6 .32-358 .el6 .x86_64 ro root=/dev/mapper/vg_craigsrh-lv_root rd_NO_LUKS LANG=en_US .UTF-8
rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_craigsrh/lv_swap rd_LVM_LV=vg_craigsrh/
lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
2 . Reboot for the new fnic_max_qdepth to take effect .
RHEL 5 .x
1 . In /etc/modprobe .conf, add an "options fnic" line to set fnic_max_qdepth at boot time:
options fnic fnic_log_level=4 fnic_trace_max_pages=128 fnic_max_qdepth=128
2 . Rebuild initrd:
mkinitrd -v -f /boot/initrd-`uname -r` .img `uname –r`
3 . Reboot for the new fnic_max_qdepth to take effect .
ESX 5 .x
1 . Set fnic_max_qdepth by running the following command in ESX 5 CLI:
# esxcli system module parameters set –p fnic_max_qdepth=128 –m fnic
2 . Reboot for the new fnic_max_qdepth to take effect .
Load-Time Configuration
RHEL / SLES11 / XS
1 . Run one of the following commands at the CLI:
# modprobe fnic fnic_max_qdepth=128
or
# insmod fnic .ko fnic_max_qdepth=128
Run-Time Configuration
RHEL / SLES11 / XS
1 . Configure fnic_max_qdepth with sysfs entry with the following command at the CLI:
# echo 128 > /sys/module/fnic/parameters/fnic_max_qdepth
5 © 2014 Cisco and/or its affiliates . All rights reserved .
fnic .fnic_max_qdepth=128