Cisco UCS B22 M3 Catatan Instalasi dan Layanan - Halaman 7
Jelajahi secara online atau unduh pdf Catatan Instalasi dan Layanan untuk Server Cisco UCS B22 M3. Cisco UCS B22 M3 31 halaman. Blade server
Juga untuk Cisco UCS B22 M3: Panduan Peningkatan (21 halaman)
Halaman Cetak
To prevent ESD damage, wear grounding wrist straps during these procedures and handle modules by the
Caution
carrier edges only.
Powering Off a Blade Server Using the Power Button
Tip
You can also shut down servers remotely using Cisco UCS Manager or CIMC. For details, see the
Configuration Guide for the version of Cisco UCS Manager that you are using. The configuration guides
are available at the following URL:
and_configuration_guides_list.html
Procedure
Step 1
If you are local to the server, check the color of the Power Status LED for each server in the chassis that you want to
power off.
• Green indicates that the server is running and must be shut down before it can be safely powered off. Go to Step 2.
• Amber indicates that the server is already in standby mode and can be safely powered off. Go to Step 3.
Step 2
Press and release the Power button, then wait until the Power Status LED changes to amber.
The operating system performs a graceful shutdown and the server goes to standby mode.
To avoid data loss or damage to your operating system, you should always invoke a graceful shutdown of the
Caution
operating system.
Step 3
(Optional) If you are shutting down all blade servers in a chassis, disconnect the power cords from the chassis to completely
power off the servers.
Step 4
Remove the appropriate servers from the chassis.
Removing a Blade Server
Using UCS Manager, decommission the server before physically removing the server. To remove a blade server from the chassis,
follow these steps:
http://www.cisco.com/en/US/products/ps10281/products_installation_
7