Epson Expression 10000XL Series Mulai Manual - Halaman 4

Jelajahi secara online atau unduh pdf Mulai Manual untuk Pemindai Epson Expression 10000XL Series. Epson Expression 10000XL Series 8 halaman. Product support bulletin(s)
Juga untuk Epson Expression 10000XL Series: Setup Manual (36 halaman), Spesifikasi (9 halaman), Brosur & Spesifikasi (2 halaman), Mulai Manual (8 halaman), Setup Manual (34 halaman), Buletin Dukungan Produk (23 halaman), Manual (11 halaman), Memperbarui (1 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (24 halaman), Buletin Dukungan Produk (29 halaman), Buletin Dukungan Produk (8 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (11 halaman), Buletin Dukungan Produk (14 halaman), Brosur & Spesifikasi (2 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (11 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (21 halaman), Buletin Dukungan Produk (12 halaman)

Halaman Cetak
Epson Expression 10000XL Series Mulai Manual
4

Connect the Scanner

Note: If you are installing the optional Network Image Express card, see the
instructions in the User's Guide.
1
Connect the scanner to your computer.
If you're using USB . . .
Plug the
USB port. Then plug the
on your computer or USB hub.
If you're using IEEE 1394 (FireWire
Plug one end of the IEEE 1394 cable (not included) into the scanner's
IEEE 1394 port. Then plug the other end into the IEEE 1394 port on
your computer.
2
Slide the transportation lock (the tab over the AC connector) up to the
Unlock position.
3
Plug the scanner's power cord into the AC connector. Then plug the
other end into a grounded electrical outlet.
4
Press the
green Ready light blinks for about 30 seconds during initialization, and
then stays on when the scanner is ready to use.
Power button
Caution
If you turn off the scanner, wait at least 10 seconds before turning
:
it back on.
square end of the USB cable into the scanner's
power button on the front of the scanner to turn it on. The
Turn over
flat end into any available USB port
) . . .
®