Epson Expression 10000XL Series Setup Manual - Halaman 32

Jelajahi secara online atau unduh pdf Setup Manual untuk Pemindai Epson Expression 10000XL Series. Epson Expression 10000XL Series 36 halaman. Product support bulletin(s)
Juga untuk Epson Expression 10000XL Series: Mulai Manual (8 halaman), Spesifikasi (9 halaman), Brosur & Spesifikasi (2 halaman), Mulai Manual (8 halaman), Setup Manual (34 halaman), Buletin Dukungan Produk (23 halaman), Manual (11 halaman), Memperbarui (1 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (24 halaman), Buletin Dukungan Produk (29 halaman), Buletin Dukungan Produk (8 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (11 halaman), Buletin Dukungan Produk (14 halaman), Brosur & Spesifikasi (2 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (11 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (21 halaman), Buletin Dukungan Produk (12 halaman)

6. Connect an Ethernet cable (Category 5 shielded twisted-pair

cable) to the RJ-45 connector on the Network Image Express

Card, and then connect its other end to the network.

7. Turn on the scanner.

8. Check the lights on the Network Image Express Card.

Initialization is in progress while the red status light and the

green data light are on. When the yellow status light goes on,

initialization is complete.

Now, you can configure the Network Image Express Card. For

the detail on using your scanner on a network, refer to the

documentation supplied with the EPSON Network Image

Express Card.

Options

Caution:

You must use a Category 5 shielded twisted-pair cable to

connect the Network Image Express Card to prevent

malfunction.

Do not connect the Network Image Express Card and the

computer directly. Be sure to use a HUB to connect the

Network Image Express Card to the network.