Epson Expression 10000XL Series Setup Manual - Halaman 14

Jelajahi secara online atau unduh pdf Setup Manual untuk Pemindai Epson Expression 10000XL Series. Epson Expression 10000XL Series 34 halaman. Product support bulletin(s)
Juga untuk Epson Expression 10000XL Series: Mulai Manual (8 halaman), Setup Manual (36 halaman), Spesifikasi (9 halaman), Brosur & Spesifikasi (2 halaman), Mulai Manual (8 halaman), Buletin Dukungan Produk (23 halaman), Manual (11 halaman), Memperbarui (1 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (24 halaman), Buletin Dukungan Produk (29 halaman), Buletin Dukungan Produk (8 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (11 halaman), Buletin Dukungan Produk (14 halaman), Brosur & Spesifikasi (2 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (11 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (21 halaman), Buletin Dukungan Produk (12 halaman)

3. Turn on the scanner by pressing the . Power button.

The scanner turns on and starts initialization. The Ready light

flashes in green until the scanner finishes initialization; it then

stops flashing and stays green. This indicates that the scanner

is ready for use.

Caution:

Whenever you turn off the scanner, wait at least 10 seconds before

turning it back on.

Connecting the Scanner to Your Computer

See the sections below to connect the scanner using the USB or

IEEE 1394 interface.

Note:

❏ Be sure to install the scanner software before connecting the scanner

to your computer. See "Installing the Software" on page 8 for details.

❏ Do not use the USB interface cable and an IEEE 1394 interface cable

at the same time.

❏ Do not connect or disconnect the USB interface cable and an IEEE

1394 interface cable when the scanner is in use.

Setting Up the Scanner

Ready light

. Power button