Epson Expression 636 Panduan Penyiapan yang Mudah - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Penyiapan yang Mudah untuk Pemindai Epson Expression 636. Epson Expression 636 21 halaman. Product support bulletin(s)
Juga untuk Epson Expression 636: Setup Manual (36 halaman), Panduan Informasi Produk (5 halaman), Manual Perangkat Lunak (4 halaman), Manual (11 halaman), Buletin Dukungan Produk (14 halaman), Buletin Dukungan Produk (5 halaman)

5. If any of the scanner's lights come on, press the OPERATE

button to turn off the scanner.

Caution:

Whenever you turn off the scanner, wait at least 10 seconds before

turning it back on. Rapidly turning the scanner on and off may

damage it.

Connecting the Scanner to Your Computer

Your scanner has both a bidirectional parallel interface and a

SCSI interface. Cables can be connected to both interfaces at the

same time, and the scanner automatically switches to the

appropriate interface.

Note:

This guide contains instructions for using the SCSI interface. If

you are using the bidirectional interface, see your Expression 636

User's Guide.

If you are already using the SCSI port on your computer for

another SCSI device, such as an external hard disk, you need a

SCSI cable with a 50-pin connector on one end and a connector to

match your other SCSI device on the other end. You can then

connect the scanner to your other SCSI device, following the

instructions in your Expression 636 User's Guide.

Follow the instructions in this section to connect the scanner

directly to the SCSI port on your computer using the SCSI

interface and cable included with the scanner. The SCSI ID is

already set to 2 and the SCSI terminator is on.

Connecting the Scanner to Your Computer 5