Epson GT-30000 Series Panduan Memulai Cepat - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pemindai Epson GT-30000 Series. Epson GT-30000 Series 24 halaman. Color image scanner
Juga untuk Epson GT-30000 Series: Spesifikasi (4 halaman), Spesifikasi (2 halaman), Informasi Produk (9 halaman), Buletin Dukungan Produk (23 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (24 halaman), Buletin Dukungan Produk (29 halaman), Buletin Dukungan Produk (8 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (11 halaman), Buletin Dukungan Produk (14 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (11 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (21 halaman), Buletin Dukungan Produk (12 halaman)

Setting the SCSI ID number

The scanner's default SCSI ID number is 2.

If you add the scanner to a system in which one of your SCSI devices already has a

SCSI ID of 2, change the ID number to an unused number using the rotary switch. See

the table below as a guide.

Availability

Not recommended

May not be available

Caution:

Do not set the SCSI ID to an ID number that is already assigned to another

device; otherwise the PC, scanner, and other devices will not operate

properly.

The scanner has a built-in terminator, which allows SCSI devices to communicate

properly with each other. You may need to change the terminator switch setting

according to your computer system.

Note:

Do not use an external terminator.

The SCSI ID rotary switch is located

at the rear of the scanner.

Description

Usually used for hard disk

Factory setting of the scanner

Usually used for the SCSI board