Digitus Plug&View OptiView DN-16028 Prosedur Peningkatan Firmware - Halaman 4
Jelajahi secara online atau unduh pdf Prosedur Peningkatan Firmware untuk Kamera Keamanan Digitus Plug&View OptiView DN-16028. Digitus Plug&View OptiView DN-16028 4 halaman. Plug&view series
Juga untuk Digitus Plug&View OptiView DN-16028: Panduan Pengguna (14 halaman), Panduan Instalasi Cepat (4 halaman)
Halaman Cetak
6. Please go to "Maintain" and browse to the new firmware (64.1.0.22-only-daemon.bin)
and press "upgrade". Please wait for 90 seconds for the camera to reboot.
After re-boot, the IP address could be changed. So please use the utility to search the
new IP address again.
7. Then repeat the same procedure to upgrade the other firmware file (64.1.0.22.bin).
Please note that the sequence of 64.1.0.22-only-daemon.bin first and then 64.1.0.22.bin
later should be followed in this order correctly.