Cisco ASR 5000 Panduan Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Gerbang Cisco ASR 5000. Cisco ASR 5000 33 halaman. Applying power and verifying the installation
Juga untuk Cisco ASR 5000: Panduan Instalasi (18 halaman), Prosedur Instalasi (8 halaman), Panduan Instalasi (37 halaman)

Halaman Cetak

Checking the LEDs on the SPIO

Each SPIO is equipped with the following status LEDs:

• Run/Fail

• Active

• Standby

In addition to the LEDs listed above, each interface to the management network (both RJ-45 and SFP) are

equipped with the following LEDs:

• Link

• Activity

Figure 4: SPIO LED Locations

The possible states for all of the SPIO LEDs are described in the sections that follow.

SPIO Run/Fail LED States

The SPIO Run/Fail LED indicates the overall status of the card. This LED should be green for normal operation.

The possible states for this LED are described in the following table. If the LED is not green, use the

troubleshooting information in the table to diagnose the problem.

ASR 5000 System Administration Guide, StarOS Release 21.2

Troubleshooting