Digitus Biometrics db Nexus II Panduan Instalasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Dengan kunci Digitus Biometrics db Nexus II. Digitus Biometrics db Nexus II 20 halaman.

Halaman Cetak

Connecting the Power Source to the Control Unit

ONLY the transformer supplied by Digitus should be used to power the control unit
•
Strip approximately ¼" (6mm) of plastic sheath from each cable to the power supply and connect to the
appropriate terminal blocks, checking that all wires are securely fastened.
•
If you previously removed the battery (as recommended), please reinstall it and fasten securely.
•
Reconnect the battery as shown below.
Models: db Nexus II, Nexus III
Please ensure that you have a power outlet near the control unit
which will ONLY be used to supply power to the control unit.
(or an exact equivalent).
Page 7 of 20
Digitus Biometrics, Inc. 2011