Epson Perfection 1660 Photo Pengaturan

Jelajahi secara online atau unduh pdf Pengaturan untuk Pemindai Epson Perfection 1660 Photo. Epson Perfection 1660 Photo 2 halaman. B11b153011
Juga untuk Epson Perfection 1660 Photo: Brosur & Spesifikasi (24 halaman), Lembar Spesifikasi (2 halaman), Mulai di sini (2 halaman)

Halaman Cetak

R4CA710/B370

Proof Sign-off:

Rev. C

K. Pipa

T. Takahashi

SET_2400.FM

S.Fish

8/5/02

Color Image Scanner

Setup

Unpacking

1. Make sure the following items are included and not damaged. If any items are missing or

damaged, contact your EPSON dealer immediately.

scanner

(Perfection 1660 Photo)

scanner software CD

USB cable

Installing the Software

The scanner software CD-ROM contains the EPSON TWAIN driver, software, and electronic manuals.

You must install the software BEFORE connecting the scanner to your computer.

1. Insert the scanner software CD-ROM into the CD-ROM or DVD drive.

Macintosh users:

After inserting the CD-ROM, the EPSON folder appears

on the desktop. (If the EPSON folder does not appear,

double-click the EPSON icon on the desktop.)

Double-click the EPSON icon inside the folder.

2. The EPSON Installation Program dialog box appears.

Select Install Software and click

Note for Windows users:

If the EPSON Installation Program dialog box does not

appear, double-click the My Computer icon. Click the

CD-ROM icon, then select Open from the File menu.

Double-click Setup. exe.

Setting Up the Scanner

1. Remove the yellow sticker from the back of the

scanner.

2. Connect the integrated TPU connector to the

scanner's option connector.

3. Slide the transportation lock all the way to the

right.

4. Connect the power cord and AC adapter, as

shown.

5. Connect the AC adapter to the DC inlet on

the back of the scanner.

4xxxxxx

1-F

A2 size

English

4025230-00

xxx

scanner

(Perfection 2400 Photo)

power cord

AC adapter

film holder

The contents may vary in certain locations.

The appearance of dialog boxes on

this sheet may differ slightly from those

on your screen.

transportation lock

option connector

integrated TPU connector

DC inlet

power cord

adapter

Rev.0

4xxxxxx

Rev.0

BK2

1-F

Warnings, Cautions, and Notes

Warnings

Cautions

must be

followed carefully to

observed to avoid damage

avoid bodily injury.

to your equipment.

2. Remove the packing tape from your scanner, but leave the yellow sticker in place until

instructed to remove it.

Important!

Leave the yellow

sticker in place until you

are instructed to

remove it.

3. Follow the on-screen instructions until all of the software is installed. When a message appears

informing you that installation is complete, click OK.

4. Restart your computer if a message appears instructing you to do so.

Note for Mac OS X users:

The software will be installed for use in the Classic mode.

For Perfection 2400 Photo users

To install Adobe

Photoshop

Elements, insert the Photoshop CD into the CD-ROM or DVD drive,

then follow the on-screen instructions.

Macintosh users:

After inserting the CD-ROM, double-click the Adobe

the desktop. Then double-click the folder of your preferred language. and double-click the

Adobe

Photoshop

Elements folder. To begin installation, double-click the installer icon

follow the on-screen instructions.

6. Plug the other end of the power cord into an electrical outlet.

Caution:

It is not possible to change the AC adapter's input or output voltage. If the label on

the AC adapter does not show the correct voltage, contact your dealer. Do not plug

in the power cord.

Whenever you unplug the scanner, wait at least 10 seconds before plugging it back

in. Rapidly plugging and unplugging the scanner can damage it.

Note:

This scanner does not have a power button. It turns on when you connect the AC adapter and

then plug in the power cord.

The scanner turns on and begins to warm up. The ]

Start button blinks green until the scanner finishes

warming up, then stops blinking and stays green.

This indicates that the scanner is ready for use.

Note:

The ] Start button light turns off if you do not use the scanner for about 15 minutes.

7. Connect the square connector on the USB cable to the USB port on the back of the scanner.

Then connect the other end of the USB cable to any available USB port on your computer.

USB port

Note:

Do not connect the scanner through any hubs.

To turn off the scanner, unplug the power cord from the electrical outlet.

4xxxxxx

Rev.0

4xxxxxx

1-F

Notes

contain important

information and useful tips on

the operation of your scanner.

Photoshop

Elements icon that appears on

. Then

Plug this end of the USB cable into

your computer.

Rev.0

4xxxxxx

Rev.0

1-F