Digitus professional DS-55503 Manual - Halaman 5
Jelajahi secara online atau unduh pdf Manual untuk Pemanjang Digitus professional DS-55503. Digitus professional DS-55503 9 halaman. 4k hdmi hdbaset extender set, 70m
Halaman Cetak2. RX Receiver
① Power input
Transmission signal
②
indicator
③ HDBT input
④ HDMI output
⑤ Reset button
⑥ RS232
IR receiver extension
⑦
cable interface
IR blaster extension
⑧
cable interface
Connect with included DC12V2A power adapter (It is
recommended to power from the receiver unit)
1. LED 1: It turns on when power on.
2. LED 2:
It turns on when the transmitter unit and the receiver
unit connect well with each other, and it flashes when
there is no transmission between the transmitter unit
and the receiver unit.
3. LED 3:
It flashes when the receiver unit connected well with
the HDMI display device, and it turns off when no
transmission between the receiver unit and the display
device.
To connect with receiver by network cable
Connect with HDMI display device
Press for restarting the unit
RS232 control
Connect with IR receiver extension cable. Please make
sure the remote control is within the required range of
IR receiver
Connect with IR blaster extension cable. Please put the
IR blaster close to source device to best transmit the IR
signal from receiver