Cisco Expressway CE1200 Panduan Instalasi - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Gerbang Cisco Expressway CE1200. Cisco Expressway CE1200 23 halaman.
Juga untuk Cisco Expressway CE1200: Panduan Pemasangan Alat (42 halaman)
Halaman Cetak
Cisco Expressway CE1200 Appliance Installation Guide
Connect to the Expressway Console
5.
In the Serial over LAN Properties, check Enabled and then click Save Changes. This step is necessary as
serial over LAN is disabled by default.
Task 3: Connect to the Expressway console (any time you need to)
1.
In a terminal emulator, use SSH to connect to the CIMC IP address.
2.
Type the default username admin and your CIMC password, and press Enter.
3.
Type
connect host
4.
You are now connected to the Expressway console using serial over LAN.
Wait for the Install Wizard to appear, and then go on to the next section
and press Enter.
Run the Install Wizard, page
16
17.