Cisco IOS Router Panduan Memulai

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Gerbang Cisco IOS Router. Cisco IOS Router 12 halaman. Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Juga untuk Cisco IOS Router: Informasi Produk (11 halaman), Catatan Aplikasi (41 halaman)

Halaman Cetak

Getting Started with Cisco IOS IPS with 5.x Format

Signatures: A Step-by-Step Guide

This guide is divided into two sections: Getting Started with Cisco IOS

Tuning.

The first section of the guide provides a detailed step-by-step process using the Cisco IOS

Software command-line interface (CLI) to get started in using the Cisco IOS IPS 5.x format

signatures. It contains the following five steps:

Step 1: Downloading Cisco IOS IPS Files

Step 2: Creating Directory on Flash

Step 3: Configuring Cisco IOS IPS Crypto Key

Step 4: Enabling Cisco IOS IPS

Step 5: Loading Signatures to Cisco IOS IPS

Each step and specific commands are described. The Additional Commands and References

section under each step provides additional information. Example configurations are displayed in a

box below each command.

The second section of the guide provides instructions and examples on advanced options for

signature tuning. Topics include:

Enable/Disable Signatures

Retire/Unretire Signatures

Change Signature Actions

Prerequisites

Before getting started with the above steps, ensure that you have the following:

A Cisco 870, 1800, 2800, or 3800 Series Integrated Services Router

128 MB or more DRAM and at least 2 MB free flash memory

Console or Telnet connectivity to the router

Cisco IOS Software Release 12.4(11)T or later

A valid Cisco.com login username and password

A current Cisco Services for IPS Contract for licensed signature update services

You should be familiar with basic router commands for:

Exec mode

Configure mode

Exit configure mode

Backup and restore configuration

White Paper

IPS and Signature

Page 1 of 12