Cisco IR530 Panduan Pemasangan Perangkat Keras - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Gerbang Cisco IR530. Cisco IR530 28 halaman. Wpan gateway and wpan range extender
IR510 WPAN Gateway and IR530 WPAN Range Extender Hardware Installation Guide
IR510 Installation
The IR510 WPAN Gateway and IR530 Range Extender can be installed at any height, but best throughput is achieved when all the
WPAN gateways and WPAN range extenders are mounted at the same height. We recommend installing the devices no higher than 40
feet to allow support for wireless clients on the ground.
Safety Warning-Hazardous Locations
Before installing this product in a hazardous location, make sure you have read and understood all of the information in the Product
Document of Compliance that shipped with the product.
IR510 Installation
This section describes the IR510 WPAN Gateway and includes the following topics:
IR510 Hardware Overview, page 3
IR510 Product IDs and Accessories, page 4
IR510 Cautions and Warnings, page 4
IR510 Hardware Specifications, page 6
IR530 Range Extender Product IDs, page 17
LEDs, page 26
Antenna, page 26
IR510 Hardware Overview
The IR510 operates within a wireless mesh network, providing intelligent control over Cisco Resilient Mesh Endpoints (RMEs) devices
that use Serial (RS232/RS485), USB (LS/FS/HS), or Fast Ethernet (10/100 Fast Ethernet) ports. Additionally, the gateway employs GPS
for time synchronization and location tracking.
The IR510 works with the CGR1000 series of routers, primarily in the electrical grid to provide a low cost, low power, small size DA
solution. The IR510 Gateway
installation of IR510 within outdoor cabinets.
For more details on product features, applications and accessories, refer to:
Cisco IR510 WPAN Industrial Router Data Sheet
(Figure 1 IR510 in IP30 Enclosure, page
7) comes within a ruggedized IP30 enclosure. The enclosure allows
3