Cisco Linksys WAG200G Panduan Pengguna - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Gerbang Cisco Linksys WAG200G. Cisco Linksys WAG200G 39 halaman. Linksys wireless-g adsl home gateway
Halaman Cetak
Chapter4
View Log
Log
Type
Select from the following: ALL, System Log,
Access Log, Frewall Log, VPN Log, UPnP Log,
Incomng Log, or Outgong Log.
Click Refresh to update the log. Click Clear to clear all
the information that is displayed. Click Prevous Page
to view the previous page of information. Click Next
Page to view the next page of information.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
Security > VPN Passthrough
The VPN Passthrough screen allows you to enable VPN
tunnels using IPSec, PPPoE, PPTP, or L2TP protocols to pass
through the Gateway's firewall.
Security > VPN Passthrough
VPN Passthrough
IPSec Passthrough
Internet Protocol Security (IPSec) is
a suite of protocols used to implement secure exchange
of packets at the IP layer. To allow IPSec tunnels to pass
through the Gateway, keep the default, Enable.
PPPoE Passthrough
Point-to-Point over Ethernet (PPPoE)
allows PPPoE to be tunneled through an IP network. To
allow PPPoE tunnels to pass through the Gateway, keep
the default, Enable.
PPTP Passthrough
Point-to-Point Tunneling Protocol
(PPTP) allows the Point-to-Point Protocol (PPP) to be
Wreless-G ADSL Home Gateway
Advanced Configuration
tunneled through an IP network. To allow PPTP tunnels to
pass through the Gateway, keep the default, Enable.
L2TP Passthrough
Layer 2 Tunneling Protocol is the
method used to enable Point-to-Point sessions via the
Internet on the Layer 2 level. To allow L2TP tunnels to pass
through the Gateway, keep the default, Enable.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
Access Restrictions > Internet Access
The Internet Access screen allows you to block or allow
specific kinds of Internet usage and traffic, such as Internet
access, designated services, and websites during specific
days and times.
Access Restrictions > Internet Access
Internet Access
Internet Access Polcy
Access can be managed by a
policy. Use the settings on this screen to establish an
access policy (after Save Settngs is clicked). Selecting a
policy from the drop-down menu will display that policy's
settings. To delete a policy, select that policy's number
and click Delete. To view all the policies, click Summary.
Summary
The policies are listed with the following information: No.,
Policy Name, Days, and Time of Day. To delete a policy,
select Delete. To return to the Internet Access Policy screen,
click Close.
1