Epson Perfection V600 PHOTO Panduan Pemecahan Masalah - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Pemindai Epson Perfection V600 PHOTO. Epson Perfection V600 PHOTO 18 halaman. Epson connect technology
Juga untuk Epson Perfection V600 PHOTO: Spesifikasi (2 halaman), Mulai di sini (2 halaman), Mulai di sini (1 halaman), Mulai di sini (2 halaman), Spesifikasi (2 halaman), Pemberitahuan dan Garansi (21 halaman), Manual Rentang (7 halaman), Mulai di sini (2 halaman)

Halaman Cetak
Epson Perfection V600 PHOTO Panduan Pemecahan Masalah
o
Be careful not to scratch or damage the glass surface of the document table, and do not
use a hard or abrasive brush to clean it. A damaged glass surface can decrease the scan
quality.
o
Never use alcohol, thinner, or corrosive solvent to clean the scanner. These chemicals
can damage the scanner components and the case.
o
Be careful not to spill liquid into the scanner mechanism or electronic components. This
could permanently damage the mechanism and circuitry.
o
Do not spray lubricants inside the scanner.
o
Never open the scanner case.
7. Turn off the scanner using the power switch.
8. Unplug the AC power cord from the scanner.
9. Disconnect the USB cable from the scanner.
10. Clean the outer case with a cloth dampened with mild detergent and water.
11. If the glass surface of the document table gets dirty, clean it with a soft dry cloth. If the
glass surface is stained with grease or some other hard-to-remove material, use a small
amount of glass cleaner on a soft cloth to remove it. Wipe off all remaining liquid.
Caution: Do not spray glass cleaner directly on the scanner glass.
12. Remove the document mat and clean the transparency unit window as described in step
5.
a. transparency unit window
Make sure that no dust builds up on the surface of the document table or the
transparency unit window. Dust can cause spots in your scanned images.
How should I transport my product?
Before you transport the scanner for a long distance or store it for an extended period of time,
the scanner's carriage needs to be in the home position to prevent damage.