Epson PowerLite 1260 Buku Panduan Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Buku Panduan Instalasi untuk Pemindai Epson PowerLite 1260. Epson PowerLite 1260 3 halaman. Multimedia projector
Juga untuk Epson PowerLite 1260: Brosur (2 halaman), Pengaturan Cepat (4 halaman), Pernyataan Kesesuaian (4 halaman), Panduan Pengguna (1 halaman), Brosur (4 halaman)
Halaman Cetak
Epson PowerLite 1220 / 1260
note
The information displayed
depends on the input signal
currently selected.
If you have used the
projector for less than
10 hours, the hours are
0H
listed as
.
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector's menu system.
1. Press the
Menu
button on the remote control or on the
projector's control panel. You see the main menu.
2. Select the
Reset
menu and press
3. Select
Reset Lamp Hours
4. When you see the prompt, select
5. When you're finished, press
Checking Lamp Usage
To check the number of hours the lamp has been used, press the
Menu
button and highlight the
The life span of the lamp is about 4,000 hours if
Consumption
in the Settings menu is
ECO
hours if this setting is
the usage hours on this menu are close to the life span of your lamp.
Enter
. You see this screen:
and press
Enter
.
Yes and
press
Menu
to exit.
Info
menu. You see a screen like this:
Power
Normal
(default), and 5,000
. Make sure you have a spare lamp handy if
INSTALLATION HANDBOOK
Enter
.
Maintenance
3