Acuity Brands nLight rPOD Micro Petunjuk Manual

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Beralih Acuity Brands nLight rPOD Micro. Acuity Brands nLight rPOD Micro 6 halaman. Wireless wall switch

Halaman Cetak

Acuity Brands nLight rPOD Micro Petunjuk Manual

• To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards please read all warnings and instructions

included with and on the fixture box and all fixture labels.

• Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.

• Installation and service should be performed by a qualified licensed electrician.

• Maintenance should be performed by qualified person(s) familiar with the products' construction & operation & any hazards involved. Regular maintenance programs recommended.

• DO NOT INSTALL DAMAGED PRODUCT! This product has been properly packed so that no parts should have been damaged during transit. Inspect to confirm. Any part damaged

or broken during or after assembly should be replaced.

• CAUTION - RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Battery type is Lithium CR2032.

CAUTION: RISK OF PRODUCT DAMAGE

√ Electrostatic Discharge (ESD): ESD can damage product(s). Personal grounding equipment should be worn

during all installation or servicing of the unit.

√ Do not touch individual electrical components, as this can cause ESD and affect product performance.

√ Do not stretch or use cable sets that are too short or are of insufficient length.

√ Do not tamper with contacts.

√ Do not modify the product.

√ Do not change or alter internal wiring or installation circuitry.

√ Do not use product for anything other than its intended use.

Contains FCC ID: 2ADCB-RPODU

Contains IC: 6715C-RPODU

IFT: En Proceso

Acuity Brands Lighting Inc. RPODU

In order to avoid the possibility of exceeding the FCC radio frequency

exposure limits, human proximity to the radiator shall not be less than

20cm during normal operation.

NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR

MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY

RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD

VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION

Gang Box Installation (WallPod Version)

Remove the aesthetic wall plate by grasping top and bottom of left and right edges, and pull away from the center. Removal of connecting frame may be neces-

sary if the aesthetic wall plate is not being used, such as if it is being replaced by a third-party wall plate.

Attach the WallPod to the gang box using a #2 Philips head screwdriver and the provided hardware.

Attach the wall plate.

Anti-Tamper Feature

The WallPod version of the rPOD Micro includes an anti-tamper feature that prevents the switch from being used when it is removed from its mounting surface. If removed

from the mounting surface, the WallPod will be disabled until it is returned to the correct orientation and is in that orientation for at least 60 seconds See the Blink Warnings

section for more information.

IS-RPODU-002

rPOD Micro

WIRELESS WALL SWITCH

FAMILY INSTRUCTIONS

US LISTED

Full warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

TITLE 20/24

CAUTION - RISK OF INJURY

√ Wear gloves and safety glasses at all times when

installing, servicing or performing maintenance.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes:

1. l'appareil ne doit pas produire de brouillage, et

2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo

debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS!

Note: Specifications subject to change without notice.

Actual performance may differ as a result of end-user environment and application.

IMPORTANT SAFEGUARDS

WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD

ALWAYS BE FOLLOWED INCLUDING THE FOLLOWING:

•

DO NOT USE OUTDOORS.

•

Do not mount near gas or electric heaters.

•

Equipment should be mounted in locations and at heights where it will not

readily be subjected to tampering by unauthorized personnel.

•

The use of accessory equipment not recommended by the manufacturer may

cause an unsafe condition.

WARRANTY

5-year limited warranty.

1 of 6