Epson Stylus Photo RX700 Series Informasi Produk - Halaman 5
Jelajahi secara online atau unduh pdf Informasi Produk untuk Pemindai Epson Stylus Photo RX700 Series. Epson Stylus Photo RX700 Series 17 halaman. Epson scan icm updater v1.20 (psb.2008.07.001)
Juga untuk Epson Stylus Photo RX700 Series: Mulai dari Sini Manual (8 halaman), Memperbarui (1 halaman), Mulai di sini (2 halaman)
Halaman Cetak
4. Slide the edge guide against the left side of the paper.
5. Extend the output tray.
Loading Epson Paper
Load specialty Epson papers in the rear sheet feeder only.
Plain paper may also be loaded in the rear sheet feeder, but
you have to specify
Plain(Back)
printing (see page 6).
Note:
Epson paper is designed to work with Epson printers and ink. If you
use different brands, you may not get the results you expect.
1. Extend the paper support.
as the Paper Type when
2. Open the front cover.
3. Extend the output tray.
4. Load your paper and slide the edge guide lightly against it.
Never load more sheets than can fit under the arrow mark
on the edge guide.
Note:
If you're using Epson paper, follow any instructions that came with it.
For example, some types of paper should be loaded only one sheet at
a time. See the electronic Reference Guide for details.
To ensure good results, always:
■
Load paper short edge first.
■
Load paper with the printable side up (it's usually whiter or
brighter).
■
Check the RX700's Paper Type setting before printing to make
sure it matches the type of paper you've loaded (see page 7).
5/05
Epson Stylus Photo RX700
Press
Epson Stylus Photo RX700
- 5