Epson Stylus Scan 2000 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemindai Epson Stylus Scan 2000. Epson Stylus Scan 2000 7 halaman. Scanning application force quits on mac os 10.4 release of twain pro driver 2.10a;
Juga untuk Epson Stylus Scan 2000: Lembar Informasi Produk (4 halaman), Mulai Cepat (4 halaman), Panduan Informasi Produk (13 halaman), Lembar Informasi Produk (4 halaman), Buletin Dukungan Produk (12 halaman), Spesifikasi (2 halaman), Manual (11 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (14 halaman), Manual (35 halaman), Panduan Pengguna (24 halaman), Panduan Online (10 halaman)

Windows 2000 did not support the USB 2.0 hardware specification at the time it was first released.

Refer to Microsoft Knowledge Base Article - 319973 Universal Serial Bus 2.0 Support in Windows

2000 for more information.

Important Notes:

1.) Operating system must not be an upgrade from Windows 95.

2.) For Windows 2000 or XP you must be logged in as an administrator or as a user with

administrator rights before you can install and use EPSON software.

USB hubs must be self-powered and connected in a first-tier configuration for reliability

3.)

Macintosh OS

USB 1.1: Apple Macintosh computer (G3, G4, or iMac) with built-in USB port, running Mac® OS 8.5.1

to 9.2.2 with all USB extensions enabled. For OS X, you must have 10.1.3 or later.

FireWire (IEEE 1394): Power PC-equipped Macintosh or newer with Mac OS 8.6 to 9.2.2 with Apple's

FireWire 2.1 (or later) software installed. For OS X, you must have 10.1.3 or later.

USB 2.0 Hi-Speed: Not supported

Important Notes:

1.) You cannot use a serial interface to connect the scanner.

2.) Interface adapter cables (i.e. SCSI to USB, or USB to Serial, etc) are not supported.

3.) USB hubs must be self-powered and connected in a first-tier configuration for reliability.

4.) FireWire port must be compliant with this specification: IEEE 1394-2000 compatible.

Page 2 of 2