Digiway P550 Buku Petunjuk - Halaman 5

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mesin Digiway P550. Digiway P550 16 halaman. Sliding gate motor
Juga untuk Digiway P550: Buku Petunjuk (15 halaman)

Halaman Cetak

1. General Descriptions

The P550-4 and P750 sliding gate motors was designed for heavy duty industry track gate or cantilever

gate. Heavy duty three phase industry motor driven by VSD (variable speed drive), gate can run at

different speeds. Built in encoder and intelligent controller combination can make the gate running more

smoothly. The controller can receive the signals from swipe card, loop detectors, remote control, photo-

electric beams and any kind of access control system. Galvanised metal sheet and powder coated high

quality cabinet (1.5mm thickness) has remove door (P750) and plenty of room for the access control

accessories including din rail mounting. 50VA transformer (12V/24v/2A) can directly drive magnetic

lock, warning lights etc.

2. Technical Specifications

Power supply

Output voltage

Motor rate

Gate type

Drive speed

Max. Gate length

Fully programmable

Accessories power supply

3. Control Board layout

Push Button

Limit SW Input

(Open PEB &

Safety switch)

Inputs Display

PE Bypass

Control Inputs

12VAC power

P750V5.0 industrial gate motor manual

CONTROL INPUIT AND BUTTON

230/240V AC at 10A

230V AC three phase (via) inverter, Max. 0.75KW

Three phase two poles 0.55KW (P550) or 0.75KW (P750)

Track or cantilever

Up to 700mm/sec (with big drive gear)

No limitation

Auto close time, PE trig close time etc.

12V@2A or 24@2A, Max. 50VA, protected by 1A fuse

Fig-2

DIP SW

Gate Status Output

Output dis. Leds

Lock/Light Output

PNP Output to

Inverter

Encoder plug

NPN Output to

Inverter