Epson Stylus Scan 2500 Informasi Tambahan - Halaman 7

Jelajahi secara online atau unduh pdf Informasi Tambahan untuk Pemindai Epson Stylus Scan 2500. Epson Stylus Scan 2500 12 halaman. Epson imaging products (scanners, digital cameras, and stylus scan devices) compatibility chart for macintosh os x classic
Juga untuk Epson Stylus Scan 2500: Panduan Pengguna (7 halaman), Lembar Informasi Produk (4 halaman), Spesifikasi (2 halaman), Lembar Informasi Produk (4 halaman), Buletin Dukungan Produk (12 halaman), Informasi Produk (12 halaman), Mulai di sini (4 halaman), Manual (11 halaman), Buletin Dukungan Produk (3 halaman), Daftar Bagian (9 halaman), Setup Manual (35 halaman), Panduan Online (10 halaman), Mulai di sini (4 halaman)

Stylus Scan driver (scanner) problems

Check if your Stylus Scan name appears under Imaging Device

hardware type without a ? or ! mark in the Device Manager menu.

To view this menu, right-click the My Computer icon on the

Desktop. If your scanner appears with a ? or ! mark, or appears

as an Unknown Devices hardware type, make sure your Stylus

Scan is turned on and connected, the click Remove to remove it

from the Device Manager menu.

Note:

If the EPSON Stylus Scan Disk is requested when reinstalling the

driver, make sure the EPSON Stylus Scan 2500 Software for Windows

CD is still in the CD-ROM drive and check that the correct drive letter,

the EPSON folder, the folder of your preferred language, and the Win98

folder are specified.

Make sure that EPSON Stylus Scan 2500 appears in the Device

Manager menu

If you canceled the plug-and-play driver installation before the

procedure was completed, EPSON Stylus Scan FB TWAIN may

be incorrectly installed.

Follow the steps below to check the installation.

1. Turn the Stylus Scan on. Plug the USB cable into the Stylus

Scan and the computer.

2. Right-click the My computer icon on your desktop, then click

Properties.

3. Click the Device Manager tab.

If your EPSON Stylus Scan FB TWAIN is correctly installed,

EPSON Stylus Scan 2500 should appear under Imaging

Device when you click the plus (+) sign next to Imaging

Device.