Epson V500 Panduan Informasi Produk - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Informasi Produk untuk Pemindai Epson V500. Epson V500 12 halaman. Color image scanner
Juga untuk Epson V500: Brosur (2 halaman), Mulai di sini (2 halaman), Panduan Memulai Cepat (2 halaman), Memperbarui (1 halaman), Brosur (2 halaman), Pemberitahuan dan Garansi (21 halaman), Petunjuk Keselamatan Penting (4 halaman), Mulai di sini (2 halaman), Mulai di sini (2 halaman)

Placing Slides

You can scan up to four 35mm slides at a time using the slide

portion of the film holder.

Note:

Make sure the white stickers on the back of the film holder and the

areas around them are not scratched, dusty, or covered in any way.

If the areas are obscured, the scanner may have trouble recognizing

your slides.

Do not cover any of the small holes in the film holder or the slots on

the sides of the film holder.

1. Place the film holder on the document table so that it is

aligned as shown. Make sure the tab labelled "C" on the

film holder fits into the area labelled "C" on the scanner.

2. Place up to four slides in the film holder with the shiny base

side facing down. Your images should appear backwards on

the side that faces up. Your images should be oriented as

shown.

3. Make sure you removed the document mat. See "Removing

the Document Mat" on page 5.

4. Close the scanner cover.

To scan your slides, see "Scanning" on page 8.

When you are finished scanning slides, be sure to replace the

document mat before scanning documents or photos. See

"Replacing the Document Mat" on page 8.

Placing Medium Format Film

1. Open the cover on the medium format film holder.

2. Slide one medium format film image into the film holder

with the shiny base side facing down. Your image and any

wording on the film should appear backwards on the side

that faces up. Make sure the entire image frame is

positioned in the film holder opening.

Note:

Hold the edge of the film gently when touching the film;

otherwise you may damage the film.

Do not cover any of the small holes in the film holder or the slot

on the side of the film holder; otherwise, the scanner may have

trouble recognizing which film holder you are using.

3. Close the cover over the film and press it down until it

clicks. Then press down on all the edges of the cover to

secure it.

4. Make sure the film is placed as shown.

7/07

Epson Perfection V500 Photo

a b c

abc

Epson Perfection V500 Photo - 7